WiW 56

Tech Guide

How to Fix Bad Pool Header Error 0x00000019 in Windows 10

Bad Pool Header Error 0x00000019 is still another BSOD (Blue Screen of Death error) which could show up on Windows 10 as well as the older versions like Windows 7 and Windows 8/8.1. The majority of the time that the blue screen of death error are temporary and may be solved with a couple of restarts. In the event, a couple of restarts failed to mend Bad Pool Header Error 0x00000019 mistake, then you might have to obtain the origin of the mistake and attempt to repair it.

This post is targeted at repairing the Bad Pool Header Error 0x00000019, however everything you want to understand before attempting one of these fixes is that there’s not any go-to remedy to repair the Bad Pool Header Error 0x00000019 from Windows 10 or other Windows variants.

This is since the Bad Pool Header Error 0x00000019 can happen due to a number of reasons and locating the origin of this issue is the only way to repair this mistake in Windows. Even the Bad Pool Header Error 0x00000019 can happen as a result of this hardware problem or due to software/drive issue.

Repair Bad Pool Header Error 0x00000019

Below are the recommended alternatives to mend Bad Pool Header Error 0x00000019 in Windows. Like I said before, finding the reason for the issue or the offender hardware / software can enable you to solve the issue.

Notice: Before you proceed to any of these fixes, try to recall what was the final thing that you did to your own body.

Installed a brand new hardware like RAM, hard disk, USB device? If so, remove them and see whether the error becomes repaired.

Installed/Updated new applications like Anti-virus, hardware drivers, your OS could be? If so, uninstall them or roll back into the prior version in the event of an upgrade.

Repair 1: Uninstall Malwarebytes / Anti-Virus Programs

Why Malwarebytes made to the record is due to the reason that it had been the offender oftentimes. Malwarebytes is a computer application which keeps your PC clean from malware. But occasionally, it might not be compatible with your PC and might create problems like Bad Pool Header Error 0x00000019 along with other BSOD errors. You will find other anti virus applications like Norton and AVG anti-virus that could cause this error.

Consequently, in case you’ve Malwarebytes installed or if you’ve recently upgraded it to the most recent version, try to re install it briefly and see whether the Bad Pool Header Error 0x00000019 was fixed.

Be aware that Malwarebytes might not produce problems in each PC, however if it’s creating issues with your PC, then you might choose to eliminate it. To disable it, you might have to boot Windows in Safe Mode.

To boot up Windows in Safe Mode, shut your system down and restart it manually. Whenever the boot screen appears, begin pressing the F8 Key to bring up the advanced options menu.

From here, pick Start Windows in Safe Mode and then uninstall Malwarebytes.

If the F8 key is not working for you and you are able to boot Window, then restart your PC completely. After in the Desktop, press on Windows Key + R and kind msconfig. Hit enter to start System Configuration.

In the System Configuration window, then click on the Boot tab. Here, assess Safe Wipe box below Boot Options.

Click on Employ after which OK. If requested to restart your PC, click Restart.

Your PC will restart in Safe Mode. Following the restart, then uninstall Malwarebytes or some other anti virus or anti virus programs which you believe could be creating the issues.

Also, download and install Revo Uninstaller Pro, that includes a trial permit. You may use this to re install all of the traces of any applications which might have left on your system even after uninstalling them.

Repair 2: Locate the Culprit Device/Driver

As I mentioned before, the Blue screen of death results from both the hardware devices or the drivers associated with those devices. However, it is not the simplest task to discover which hardware device or driver is causing Bad Pool Header Error 0x00000019. However, with just a small bit of brainstorming, you may have the ability to get the offender hardware driver or device.

Every time a blue screen of death appears or your system crashes because of BSOD; an accident log file will be generated automatically and saved on your computer. The log files include the crash record and needless to say, hints at what may have triggered the BSOD error.

The crash log files called minidump files will be saved with an expansion. Dump so that you will not have the ability to read it with any text editor. To examine it, you may download a modest free Windows utility named BlueScreenView.

BlueScreenView is a useful little utility that automatically scans all of the minidump files and lets you read it.

Download Bluescreenview out of here and execute the executable file. It does not need any installation. Upon conducting it automatically scans all of the minidump files and shows the result in the top pane. Try to hunt using the info supplied by the minidump files on BlueScreenView, and you also might come across the precise solution.

Otherwise, visit C:\Windows\Minidump and upload the minidump.dmp documents into OneDrive account. Head over to Microsoft Replies forum and supply hyperlinks to your minidump files so that moderators can allow you to locate the particular problem hopefully.

In the majority of the circumstances, you might just have to upgrade one of your device drivers or disable any program. Moreover, minidump files can allow you to locate the problematic drivers.

Repair 3: Restore Method to Update

When the above fix did not work for you, then you may use System Restore points made by System Protection to restore your PC to a previous point in time. Your Windows PC automatically generates System Restore point occasionally. Thus, in the event something goes wrong later, you may use those formerly created system restore points to re-establish the PC into the country where it had been at the place in time.

System Restore points produce a backup of system registry documents and programs and save them on your computer. Your System Restore points do not save your folders or files which aren’t from the system. Nor your folders and files will be impacted at the time of system restore.

There are two methods to do a system restore in Windows 10. You can refer that connection for detailed information.

Follow the following steps if You can boot up Windows to execute system restore:

Open Control Panel and click on System and Security. Beneath System and Safety, click Program. In the left side, click on System Protection.

Beneath System Protection tab, then click on System Restore button.

Today you will observe an advocated restore point using a date of this restore point production. If you would like to restore Windows for the date, then choose that Restore stage and continue.

If not pick Pick another restore point choice and click Next. Here you will see all of the available restore points on your system. Pick the restore point in line with the date on which your machine has been functioning fine.

Click Next to keep. Confirm your choice to a Restore your PC into the chosen Restore Point and choose Finish.

Your PC will restart as well as the recovery procedure will start. Following the System Restore you will see a success message. If the restore fails, then pick another restore point and then try again.

Follow the following steps if You Cannot boot to Windows:

Now the chance is that you can not have the ability to boot to Windows due to this Bad Pool Header mistake. In these scenarios, you need to get into the Restore Choice from the Advance startup menu in the right time of boot.

It is possible to bring up the Advanced Startup Menu by pressing F8 always once you find the black screen during resume.

If F8 is not working for you, then follow these steps to acquire the Advanced startup choices.

Restart your PC by pressing the power button. When the PC restarts, press and hold the power button before the PC shuts down again.

Repeat this measures for 3 to 4 days or till you view; Please Wait for display. This may take you into Recovery Choice. In the Retrieval Choice menu Click Watch Advanced Repair Options.

From here click on Troubleshoot and next click on Advanced Options.

Beneath Advanced choices, pick System Restore. If requested to choose any user accounts, select Administrator accounts and login using a password.

From here follow the steps below to Restore system to a previous point in time.

  • You will observe an advocated restore point using a date of this restore point production. If you would like to restore Windows for the time, then pick which Restore stage and continue.
  • If not pick Pick another restore point choice and click Next. Here you will see all of the available restore points on your system. Pick the restore point in line with the date on which your machine has been functioning fine.
  • Click Next to last. Confirm your choice to a Restore your PC into the chosen Restore Point and select Finish.

Your PC will restart, and also the recovery process will start. Following the System Restore you will see a success message. If the restore fails, then pick another restore point and then try again.

Following the recovery procedure is done, wait and see whether the Bad Pool Header Error 0x00000019 happens again or it has been fixed.

Repair 4: Refresh/Repair Your Display

If nothing sounds working, you can try updating your Windows 10 computer. Updating your pc does not get rid of any personal data from the System, so it is secure and also a better choice than just resetting your PC. After the reset, your system configurations will be set to default, and it will repair the BAD_POOL_HEADER Error in Windows.

To refresh your system, follow these steps:

  1. Close down your PC entirely.
  2. Add Windows 10 bootable USB flash drive or disk (CD /DVD) and then restart your PC. If you are using Windows 8, then add Windows 8 bootable disk.

Do not have Windows 10 bootable drive? Discover how to make Windows 10 bootable flash drive.

  1. From Windows Setup screen, click Next.
  2. Select Repair Your Display alternative from another window.
  3. Click and choose Troubleshoot if requested to select an Choice.
  4. Under Troubleshoot display, click on Restart your PC.
  5. Click Next after which from pick a target operating system display, click on Windows 10 or Windows 8 whichever is the operating system.
  6. At last, click, Refresh to begin the update process.

The refresh procedure will start. Wait till the Windows 10 system get refreshed. The PC will restart automatically following the update process was completed.

 

Leave a Reply

Your email address will not be published. Required fields are marked *

WiW 56 © 2017